Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil in the manual gearbox of the Audi TT

Model: Audi Tt MK 1, 8N - Years 1998-2006
Part: Transmission

To change the oil of the 6-speed manual gearbox in the video, the turbine has already been removed as it must be replaced and the gearbox oil is changed with the occasion. We put the car on level, lifting it, under the car we find the oil drain nut, moving the coil for the steering box we find the nut to top up the oil and if there is a 4x4 as in the video there is another bleed nut on the 4x4 side. Now we are going to unscrew the nut of the oil pan, placing a pan just below being careful of the washer we drain the oil. In the use and maintenance booklet we find the liters needed to be inserted in the pair which are 2.6 liters, when the oil has been completely drained we can remove the cap for topping up and put the bleed cap back on (screwed to 45newton). Now let's go to the 4x4 side, unscrew the cap, drain the oil and clean the cap well, paying attention to the magnet attached to the cap. Once cleaned, we can reinsert the cap of the 4x4 by changing the gasket and now through a funnel from above aided by a tube that reaches the top-up cap we pour the oil (in the video the 80-90 of the elf is used), pour the 2 , 6 liters in the cap and the operation is finished.

Posted on 19 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the wiper motor on the Audi TT?
How do you replace the wiper motor on the Audi TT?
Audi Tt (1998-2006 / MK 1, 8N) To be able to replace the wiper motor on the Audi TT, you must first loosen the bolts that secure the blades and remove them. Next, you will need to …
How do you replace the rear light on the Audi TT?
How do you replace the rear light on the Audi TT?
Audi Tt (1998-2006 / MK 1, 8N) In order to replace the rear light of the Audi TT it is necessary to open the tailgate of the luggage compartment and go to unscrew the knob located …
How to reset the service light on Audi TT
How to reset the service light on Audi TT
Audi Tt (2006-2014 / 8J, MK 2) In this video tutorial we can see how it is possible to reset the service warning light on an Audi TT by following a few simple steps which will guid…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos