Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Audi A1 tire warning light

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part:

The sensor that automatically detects the car tire pressure is of undoubted importance and reliability. Nevertheless, it may happen that he has small reading problems or that he simply does not update the values despite the installation of new tires. And as a result, the corresponding warning light also appears on the on-board computer display. To reset the latter, it is necessary to turn on the ignition and navigate within the vehicle menu by pressing the appropriate button located just below the CD player. Then select the item "check and maintenance" and then on "tire pressure monitoring". Give the ok to save the new reading and exit the menu. The reset operation is complete.

Posted on 29 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Audi A1?
How do you reset the tire pressure warning light on the Audi A1?
Audi A1 (2010-2018 / MK 1, 8X) To reset the tire pressure warning light of the Audi A1, you need to inflate the tires until they reach the recommended pressure value: this value wi…
How to reset the tire pressure sensor of an Audi A1?
How to reset the tire pressure sensor of an Audi A1?
Audi A1 (2018-2025 / GB, MK 2) To reset the tire pressure warning light on an Audi A1, turn on the instrument panel without starting the engine. Use the controls on the steering wh…
How to reset the low tire pressure warning light on the Audi A1
How to reset the low tire pressure warning light on the Audi A1
Audi A1 (2010-2018 / MK 1, 8X) If we have noticed that the low tire pressure warning light has come on in the instrument panel of our car, we must proceed to check the actual infla…

How to Remove an EGR Valve from a Land Rover Freelander

This video shows how to remove an EGR valve from a Land Rover Freelander. Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, removing the piece from the engine bay. Start unscrewing the fixing pins of the EGR valve as shown in the video. Once the piece is removed from its seat, unscrew the screws present on it with a screwdriver. Disconnect the power connectors from the valve, and remove it from the engine bay. Once the piece is removed, install the new EGR valve in the engine bay with the associated parts. Finally, reassemble the ventilation pipe in the engine bay after cleaning it of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos