Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the particle filter on the Audi A6 3.0 TDI

Model: Audi A6 C6, MK 3 - Years 2004-2012
Part: Diesel particulate filter

We see in this guide the main instructions on how to remove and replace the particulate filter on the Audi A6 3.0 TDI, but also on the 2.7 TDI; we remind you that this filter is disassembled for replacement and its removal is forbidden. Then we raise the car and start unscrewing the screws of the exhaust manifold brackets; once removed we go to cut our plugged particulate filter, then replacing it with the new one through a welding process. Finally we are going to install the manifold and the muffler again, following the video tutorial to the end!

Posted on 13 August 2022 by ScegliAuto

Video tutorial

Related tutorials

Audi A6 (2004-2012 / C6, MK 3) Following these brief instructions, we will see how to disassemble and replace the engine air filter of the Audi A6 with a 2.7 TDI engine, in simple …
Audi A6 (2004-2012 / C6, MK 3) In this short and simple guide, we will see the instructions that will allow us to disassemble and replace the alternator of the Audi A6 3.0 TDI. Fir…
Audi A6 (2004-2012 / C6, MK 3) We see in this video the main instructions to remove the alternator on an Audi A6 3.0 TDI V6. First we open the bonnet of our car and we go to discon…

How to Replace the Diesel Filter on a Dacia Duster

Let's see how to replace the diesel filter on a Dacia Duster. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdriver (remove the circle), then reach the front headlamp located in the bumper (as shown in the video). After removing the container, take out the filter inside and fit a new one (same size). Refit the container and the plastic cover under the car's bumper with the attached clips. Test the proper functioning. Refit the front circle with the securing clips and lower the car.

Watch the video!


by ScegliAuto

More videos