Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : How to disassemble the alternator on Audi A6 3.0 TDI V6

Audi A6 - Video tutorial

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Alternator
Operation: How to disassemble the alternator on Audi A6 3.0 TDI V6

We see in this video the main instructions to remove the alternator on an Audi A6 3.0 TDI V6. First we open the bonnet of our car and we go to disconnect our battery, using a 10 mm wrench to unscrew the terminal screws; after which we remove, disconnect the power supply terminals of the alternator monster and unscrew the fixing screws of the same, using a ratchet wrench. At this point we proceed with the removal of the V-belt to remove and replace the alternator; then we apply the reverse procedure for reassembly!


Posted on 30 January 2024 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos