Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B7
- Years 2004-2008 The removal of the front seat of the Audi A4 is carried out by loosening the screws located in the front and in the rear part of the rails on which the seat slides. Once these bolts have been loosened, it will be possible to disconnect the connectors located in the lower part of the seat, towards the center. When these have also been disconnected, it will be possible to remove the old seat from inside the passenger compartment and replace it with a new spare part. The new seat must therefore be properly fixed and connected to the connectors.
Posted on 14 August 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |