Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Fender

Model: Audi Tt MK 1, 8N - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Body

See other generations:
Video tutorial

Start by placing the vehicle on appropriate jack stands and removing the front wheel. Next, unscrew all the fasteners of the wheel well cover to remove it. Clean any dirt accumulated inside the fender and unscrew the fasteners of the soundproofing cover, beneath which are the fasteners for the fender itself.

Proceed to remove these, as well as those along the inner edge of the hood closing line and those under the headlamp, finishing with the fasteners at the front edge of the fender. At this point, you can remove the fender from its position.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Front Bumper Installation Instructions
Front Bumper Installation Instructions
Audi Tt (1998-2006 / MK 1, 8N) Removing the front bumper is quite simple, but to facilitate the process, lift the vehicle on appropriate automotive jack stands to make it easier to…
Instructions for Removing Front Headlight
Instructions for Removing Front Headlight
Audi Tt (1998-2006 / MK 1, 8N) To remove the front headlight, you must also remove the front bumper. It is advisable to lift the vehicle on appropriate jack stands and remove the f…
Removing the Front Bumper Grille of the Audi TT
Removing the Front Bumper Grille of the Audi TT
Audi Tt (2006-2014 / 8J, MK 2) Today's brief instructions will show you how to remove and replace the front bumper grille of the Audi TT by following these simple steps. First, ope…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos