Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear bumper on the Audi Q3?

Model: Audi Q3 8U - Years 2011-2018
Part: Rear bumper

In order to replace the rear bumper of the Audi Q3, the moldings located along the perimeter of the rear wheel arches must be removed: after these have been removed, it will be possible to loosen the additional screws that secure the bumper to its housing. These screws are located at the bottom of the bumper, at the top (accessible by opening the tailgate) and also inside the trunk. After all the screws have been removed, you can also remove the two rear lights and then proceed to remove the bumper itself, replacing it with a new one.

Posted on 9 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of the Audi Q3.
How to remove the front bumper of the Audi Q3.
Audi Q3 (2011-2018 / 8U) In this guide, we will see the instructions that will allow us to disassemble and remove the front bumper of the Audi Q3. First, let's open the hood …
How to disassemble the rear bumper of the 2017 Audi Q3
How to disassemble the rear bumper of the 2017 Audi Q3
Audi Q3 (2011-2018 / 8U) If you want to find out how to remove the rear bumper of your first-generation Audi Q3 (2017) on your own and without the help of a professional, all…
How do I replace the light bulb on the rear bumper of the Audi Q3?
How do I replace the light bulb on the rear bumper of the Audi Q3?
Audi Q3 (2011-2018 / 8U) In order to replace the light bulb on the rear bumper of the Audi Q3, you need to remove the small plastic cover located on the bumper, immediately b…

Other guides you may be interested in

How to Remove the Interior Light of a Mini

Remove the interior light of a Mini: use a screwdriver or plastic lever to pry between the cover and the light itself (avoid damaging the headlining), pull the cover out from the panel and disconnect the power connector after removing it. Replace the damaged bulb with a new one (same size and voltage). Refit the light into its housing (push it in with your hands until the metal clips are fully locked). Test the light's functionality before completely refitting the piece.

Watch the video!


by ScegliAuto

More videos