Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on the Audi A3

Model: Audi A3 8Y, MK 4 - Years 2020-2026
Part: Headlight

To replace the front headlight on the Audi A3, open the bonnet to access the screws securing the front grille from the top. By unscrewing these screws and those securing the headlight from the top of the engine bay, you can then proceed to unscrew the screws inside the corresponding wheel arch. This can be removed along with the corresponding part of the bumper, providing access to the screws securing the headlight from the bottom. By unscrewing these screws and disconnecting the connector at the back, the headlight can be extracted and replaced with a new one.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on an Audi A3
How to Replace the Front Headlight Bulbs on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Replace the bulb mounted in the (left front) headlight on an Audi A3. Open the bonnet and secure it; locate the rear of the headlight, remove the rub…
Replacing Front Headlight on Audi A3
Replacing Front Headlight on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Is the front headlight of your Audi A3 damaged? Let's see how to remove it. Before removing the headlight, disconnect the power connectors. Open the …
Replacing the Front Headlamp Bulb on the Audi A3
Replacing the Front Headlamp Bulb on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Follow these brief instructions to remove and replace the dipped beam bulb in the front headlamp of the Audi A3. First, open the bonnet of the vehicl…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos