Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lift Supports on the Audi A4

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Hydraulic pistons

See other generations:
Video tutorial

Below are the steps to remove and replace the lift supports for the rear hatch of the Audi A4. First, open the trunk and start disengaging the metal clips found on the hatch using a thin lever like a flathead screwdriver, as shown in the video. Next, disengage the support at the base to remove it and replace it with the new one; then secure it at the base and attach it to the trunk, repeating the same procedure to replace the other lift support!


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Remove the Inner Panel of the Trunk Lid on an Audi A4?
How to Remove the Inner Panel of the Trunk Lid on an Audi A4?
Audi A4 (2007-2016 / B8) To remove the inner panel of the trunk lid on an Audi A4, open the trunk itself to access the coverings of the lift supports that hold up the trunk. …
How to access the red menu of the Audi A4?
How to access the red menu of the Audi A4?
Audi A4 (2014-2024 / B9) Various navigation menus have been found on Audi vehicles depending on the model, year, and equipment. Audi offers different navigation and multimedi…
How to Disable Audi Pre Sense in an Audi A4
Audi A4 (2007-2016 / B8) In this video, we will see how to disable the active driving assistance system Audi Pre-Sense. Specifically, we will focus on an Audi A4 B8. Start by…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos