Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Cabin Fan on the Audi A3 8P Version

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

If the cabin fan on the Audi A3 is not working, first check that the fuse is not blown. The fuse box for the cabin is located on the side of the dashboard, and the problematic fuse is #F22, which in this case was fine, so we must replace the fan. It’s not difficult, as shown by our YouTuber.

We do need to remove the glove compartment, but there are only three screws at the top and three at the bottom. To remove the fan, we need to take off a small rod, after which we can unscrew the fan and disconnect the connector.

If you want to buy a new one, it costs about £60.00 (+ shipping costs) on major e-commerce platforms, or you can do like our friend who bought a used one. All that’s left is to reassemble everything and the job is done.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light on an Audi A3 S3 and RS3
How to Remove the Rear Light on an Audi A3 S3 and RS3
Audi A3 (2012-2019 / 8V, MK 3) This guide shows how to remove the rear light on an Audi A3, both in S3 and RS3 versions. The first operation is to open the boot and remove the trim…
Where are the Fuses Located in an Audi A3 8P?
Where are the Fuses Located in an Audi A3 8P?
Audi A3 (2003-2013 / 8P, MK 2) The fuse boxes of the Audi A3 8P are located in the passenger compartment and the engine bay. In the passenger compartment, they are behind a cover b…
How to Synchronise the Automatic Air Conditioning on an Audi A3 8P
How to Synchronise the Automatic Air Conditioning on an Audi A3 8P
Audi A3 (2003-2013 / 8P, MK 2) This video demonstrates how to synchronise the zones of the Climatronic system in the Audi A3 8P, allowing you to control the temperature on both sid…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos