Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble an Audi A6 center console

Model: Audi A6 C6, MK 3 - Years 2004-2012
Part: Transmission

In this video tutorial we can see how you can disassemble an Audi A6 center console. We have to remove the coating on both sides; then on the driver's side we have to remove this small plastic cover to be able to unscrew the 25 torx screws. Now using a lever we have to remove the cladding, once the cladding has been removed we have to remove the air intake using a metal lever. Then we have to unscrew the nut that holds the central glovebox, disconnect the cable, unscrew the screws which are located in front of the gearbox; remove the automatic transmission cover; the center console is now ready to be removed.

Posted on 1 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the central console of the Audi A6
How to disassemble the central console of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) Today's main steps will show us how to disassemble and replace the central console of the Audi A6, following the instructions below. First, we get in…
How to disassemble the central console of the Audi A6
How to disassemble the central console of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) The following steps will show us how to disassemble the console and the central tunnel of the Audi A6. First, we get inside the cabin and start remov…
How to disassemble the central tunnel of the Audi A6
How to disassemble the central tunnel of the Audi A6
Audi A6 (2011-2018 / C7, MK 4) Today we will discover the instructions that will allow us to disassemble and remove the central tunnel of the Audi A6, in simple steps. First of all…

How to Replace the Gear Knob on an Opel Astra

Want to replace the gear knob and gaiter on an Opel Astra? Follow these steps: Use a plastic lever to detach the leather gaiter frame. Grip the knob and rotate it left and right until it comes off the gear stick (cut the plastic tie if present). For installation: Take the new knob and slide it onto the stick in the centre console, securing it in place; fit the new leather gaiter (plastic frame) using clips and all the trim plastics. Test the correct operation of the part.

Watch the video!


by ScegliAuto

More videos