Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Warning light – error code

If you have replaced the engine oil and the corresponding filter on this car, you must complete the operation by updating and resetting the service indicator that is present and illuminated on the instrument cluster. To do this, refer to the useful instructions in the tutorial video and the description below. After positioning yourself in the driver's seat, identify the button located at the bottom right of the instrument cluster and press and hold it, then turn on the ignition. At that point, the reset indication will turn off after a few seconds.

Updated on 16 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Service Light on an Audi A3 MK4
How to Reset the Service Light on an Audi A3 MK4
Audi A3 (2020-2026 / 8Y, MK 4) Here we see how to reset the service light on an Audi A3 MK4 that uses the MIB3 multimedia system with a touchscreen. Turn on the instrument panel an…
How to Reset the Service Light on an Audi A3
How to Reset the Service Light on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) To reset the service light on the Audi A3, first get in the vehicle and close all four doors. Turn on the ignition. You will see the service inspecti…
How to Reset the Service Light in an Audi A3?
How to Reset the Service Light in an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial, we will see how to reset the service light in an Audi A3, an extremely simple and quick operation to perform only after completing …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos