Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Structure

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Body

Removing the so-called front structure, which serves as the support for the headlights and radiator, is very simple: it involves patiently removing the various elements that make up the front end; start by removing the bumper, which is secured with a series of screws to the hood closure crossmember and then to the lower splash panel; once the bumper is removed, take off the headlights, the impact bar, and continue with the fastening pins of the structure, including those of the radiator; then disconnect the hood latch release cable and remove the structure.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Front Fender
Instructions for Removing the Front Fender
Audi Tt (1998-2006 / 8N, MK 1) Start by placing the vehicle on appropriate jack stands and removing the front wheel. Next, unscrew all the fasteners of the wheel well cover to remo…
Instructions for Removing Front Headlight
Instructions for Removing Front Headlight
Audi Tt (1998-2006 / 8N, MK 1) To remove the front headlight, you must also remove the front bumper. It is advisable to lift the vehicle on appropriate jack stands and remove the f…
Disassembly of the front bumper grille of the Audi TT.
Disassembly of the front bumper grille of the Audi TT.
Audi Tt (2006-2014 / 8J, MK 2) Today's brief instructions will show us how to disassemble and replace the front bumper grille of the Audi TT, following these simple steps. First, w…

Other guides you may be interested in

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos