Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Transmission ECU on an Audi A6

Model: Audi A6 C7, MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

In this guide, you will learn the steps to reset the transmission ECU on an Audi A6. First, get inside the vehicle and press and hold the accelerator pedal, then press the ignition button once to turn on the instrument cluster; wait ten seconds before releasing the accelerator pedal and then turn off the ignition.

This will complete the learning and reset of the transmission ECU; check that any transmission faults have been cleared.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Reset the Transmission and ECU on an Audi A6
How to Reset the Transmission and ECU on an Audi A6
Audi A6 (2018-2026 / MK 5, C8) Today, this brief video tutorial will explain how to reset the transmissions and ECU of the latest generation Audi A6. Start the reset by entering th…
How to Reset the DSG Automatic Transmission of the Audi A6
How to Reset the DSG Automatic Transmission of the Audi A6
Audi A6 (2011-2018 / C7, MK 4) Below are the steps to reset the DSG automatic transmission of the Audi A6. First, get in the vehicle and turn on the ignition; then press and hold t…
How to Replace the Fluid on Audi A6
How to Replace the Fluid on Audi A6
Audi A6 (2004-2012 / C6, MK 3) Here’s how to replace the transmission fluid on an Audi A6: position your car on a lift or jack and raise it to a comfortable height for disassembly.…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos