Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fluid on Audi A6

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

Here’s how to replace the transmission fluid on an Audi A6: position your car on a lift or jack and raise it to a comfortable height for disassembly. To change the transmission oil: remove the bolt located under the frame with a socket wrench as shown in the video.

Once the bolt is removed, let the fluid drain into a container (use a dedicated pump for internal cleaning). Prepare to reinstall the bolt on the transmission with the wrench, then top off with the appropriate fluid.

Finally, test the proper operation of the transmission (shift the gear lever).


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Reset the Transmission ECU on an Audi A6
How to Reset the Transmission ECU on an Audi A6
Audi A6 (2011-2018 / C7, MK 4) In this guide, you will learn the steps to reset the transmission ECU on an Audi A6. First, get inside the vehicle and press and hold the accelerator…
Replacing the Shift Knob on the Audi A6 Automatic Transmission
Replacing the Shift Knob on the Audi A6 Automatic Transmission
Audi A6 (2011-2018 / C7, MK 4) These brief steps will guide you through the process of removing and replacing the shift knob on the Audi A6 automatic transmission. First, get in th…
How do you unlock the automatic gearbox of the Audi A6?
How do you unlock the automatic gearbox of the Audi A6?
Audi A6 (2011-2018 / C7, MK 4) It will be possible to unlock the automatic transmission of the Audi A6 by levering with an object so that it is possible to detach the leather cover…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos