Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the DSG Automatic Transmission of the Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Transmission

Below are the steps to reset the DSG automatic transmission of the Audi A6. First, get in the vehicle and turn on the ignition; then press and hold the accelerator pedal for thirty seconds, as shown in the video. At this point, release the pedal and start the engine normally; this will reset the DSG automatic transmission control unit. To perform a forced reset, you will need a specific diagnostic tool connected to the OBD port.

Posted on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Unlock the Automatic Transmission in an Audi A6?
How to Unlock the Automatic Transmission in an Audi A6?
Audi A6 (2011-2018 / C7, MK 4) In this tutorial, you will see how to unlock the automatic transmission in an Audi A6, a very simple operation that can be done in an emergency situa…
How do you unlock the automatic gearbox of the Audi A6?
How do you unlock the automatic gearbox of the Audi A6?
Audi A6 (2011-2018 / C7, MK 4) It will be possible to unlock the automatic transmission of the Audi A6 by levering with an object so that it is possible to detach the leather cover…
How to Replace the Automatic Gear Shift Knob on an Audi A6?
How to Replace the Automatic Gear Shift Knob on an Audi A6?
Audi A6 (2011-2018 / C7, MK 4) To replace the automatic gear shift knob on an Audi A6, use a tool to pry at the base of the leather boot so that it can be fully lifted. This will a…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos