Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A1
    4. : Where is the fuse box located in the Audi A1?

Audi A1 - Video tutorial

Model: Audi A1 MK 2, GB - Years 2018-2024
Part: Fuse box
Operation: Where is the fuse box located in the Audi A1?

If you own a second-generation Audi A1 (2018-2022) and want to find out where the box containing all the various fuses of the vehicle is located, then all you have to do is read the following guide carefully and follow the steps described. Before proceeding, remember to turn off your Audi A1 and disconnect the battery for safety reasons. At this point, reach the driver's seat and locate the small panel located below the steering wheel. Remove it with your own hands and finally locate the fuses you were looking for.


Posted on 24 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Audi A1 2010-2018 - Where is the fuse box located in the Audi A1? Read Answer
    • Audi A1 2010-2018 - What is the fuse for the horn on the Audi A1? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos