Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt in an Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: V-belt

In this tutorial, you will see how to replace the serpentine belt in an Audi A4, a very simple and quick operation. To do this, you will only need a 16mm wrench and the correct replacement part. First, ensure that the engine is cold, then open the hood, lift the front of the vehicle while taking the necessary safety precautions, and go underneath it. At this point, locate the tensioner bolt, grasp it with the wrench, and move it to the left side of the car. Once the old belt is released, install the replacement in the same manner, making sure to follow the routing diagram.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on an Audi A4
How to Replace the Serpentine Belt on an Audi A4
Audi A4 (2007-2016 / B8) Start by opening the hood of your Audi A4. To perform this operation more easily, raise the vehicle. Next, loosen the tensioner using a 16 mm wrench.…
How to Replace the Serpentine Belt on the Audi A4
How to Replace the Serpentine Belt on the Audi A4
Audi A4 (1994-2000 / B5) If you intend to replace the serpentine belt on this vehicle model, the following description includes all the steps and procedures to follow for a p…
How to replace the V-belt on an Audi A4 B7
How to replace the V-belt on an Audi A4 B7
Audi A4 (2004-2008 / B7) Let's see in this video how to replace the auxiliary belt on an Audi A4 B7 version: we open the hood and remove the engine cover, then with a small s…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos