Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the V-belt on an Audi A4 B7

Model: Audi A4 B7 - Years 2004-2008
Part: V-belt

Let's see in this video how to replace the auxiliary belt on an Audi A4 B7 version: we open the hood and remove the engine cover, then with a small screwdriver, we release the belt, which is located at the bottom of the engine, and remove it completely. For the installation, we need to refer to the diagram displayed in the video, which shows the exact path of the belt, highlighting the direction of rotation of each pulley. Once the belt is installed, let's turn it a couple of times by hand and then try to start the engine to visually check that the belt is rotating correctly. We put the engine cover back on and the job is done.

Posted on 30 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi A4 (2007-2016 / B8) In this guide, we will see the useful information for replacing the timing belt of the Audi A4 2.0 TDI; the manufacturer declares that, on this type …
Audi A4 (2007-2016 / B8) To ensure that the timing belt of the Audi A4 is replaced, it will be necessary to lift the car so that the corresponding front right wheel is remove…
Audi A4 (2007-2016 / B8) In this video, you will learn when to replace the timing belt on the Audi A4 2.0 TDI. One of the indicators that the timing belt needs to be changed …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos