Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Arrangement of fuse boxes in the Audi A4 B8 version.

Model: Audi A4 B8 - Years 2007-2016
Part: Fuse box

In this video, we see the indication of the fuse arrangement in the Audi A4 B8 version: the fuse box is located within the dashboard and can be accessed from the driver's side by using a plastic spatula to avoid damaging the dashboard itself. Here we find the fuse for the cigarette lighter power outlet in the red fuse panel, which are F1 (located in the rear center console) and F2 (located in the front center console). The other fuse box is located in the trunk, on the passenger side, above the wheel well. Here we will find the cigarette lighter socket fuses, F3 and F4.

Posted on 15 June 2023 by ScegliAuto

Video tutorial

Related tutorials

Localization and diagram of the fuse boxes on the Audi A4 B7.
Localization and diagram of the fuse boxes on the Audi A4 B7.
Audi A4 (2004-2008 / B7) In this video we see the location and diagram of the fuse boxes contained in the Audi A4 B7 version: the fuses are located in the thickness of the da…
Where are the fuses located in the Audi A4?
Where are the fuses located in the Audi A4?
Audi A4 (2007-2016 / B8) On board the Audi A4, all the fuses will be divided within the appropriate fuse boxes that are installed in the vehicle: in this type of car, it will…
Location and scheme of the fuses of the Audi A4
Location and scheme of the fuses of the Audi A4
Audi A4 (1994-2000 / B5) Let's see in this guide the layout and positioning of the fuse boxes of the Audi A4, following the instructions below. First we open the front door, …

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2007-2016 - Where is the fog light fuse located in the Audi A4? Read answer

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos