Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Gear Shift Lever on an Audi TT MK1

Model: Audi Tt MK 1, 8N - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Transmission

See other generations:
Video tutorial

In this video tutorial, we can see how to repair the gear shift lever on an Audi TT MK1 that has a broken rubber bushing. To disassemble, you need to detach the plastic cover of the handbrake using a Torx wrench and disconnect the plug located under the cover.

Put the car in neutral and unscrew the shift knob; in front of the shifter, there are buttons that you need to lift and disconnect the plugs using a screwdriver. Once the buttons are removed, lift and remove the glove compartment; at this point, use a Torx wrench to unscrew the fasteners of the center console.

Once all the screws are removed, you can lift the center console to take it out. Now you can replace the rubber bushing by installing a new one. Once the bushing is in place and the issue is resolved, reassemble all parts in reverse order.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to remove the shift knob on an Audi TT
How to remove the shift knob on an Audi TT
Audi Tt (1998-2006 / MK 1, 8N) The following steps will guide you through the process of removing and replacing the manual shift knob on an Audi TT. First, get inside the cabin and…
How to reset the TPMS light on the Audi TT
How to reset the TPMS light on the Audi TT
Audi Tt (2014-2023 / MK 3, 8S) If you own a third edition Audi TT and need to manually reset the tire pressure warning light, you just need to follow these steps. First, start the …
How to reset the TPMS light on the Audi TT
How to reset the TPMS light on the Audi TT
Audi Tt (2014-2023 / MK 3, 8S) The access methods to the TPMS reset menu on an Audi TT can be done by using the joystick to select the "Vehicle" option or by pressing the left butt…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos