Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the automatic gearbox in an Audi?

Model: Audi Audi Various
Part: Warning light – error code

In this tutorial, you will learn how to reset the automatic gearbox in an Audi, an extremely simple and quick operation, to be performed in case of a malfunction or after a change of ownership. First, enter the cabin, then insert the key and turn on the instrument panel. Next, press the accelerator pedal for about 15 seconds, start the engine, and while keeping it running for at least 3 seconds, move the gearbox through each available position. At this point, turn off the vehicle and press the accelerator again for 15 seconds.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the automatic transmission of Audis?
How do you reset the automatic transmission of Audis?
Audi Audi Various In order to reset the automatic gearbox of an Audi, you need to turn on the instrument panel by inserting the ignition key into the corresponding slo…
How do you reset the automatic gearbox of Audi cars?
How do you reset the automatic gearbox of Audi cars?
Audi Audi Various To completely reset the automatic gearbox of the Audi, you will need to turn on the instrument panel by turning the ignition key in the corresponding…
How to reset the automatic transmission in an Audi?
How to reset the automatic transmission in an Audi?
Audi Audi Various In this tutorial we can see how to reset the automatic transmission in an Audi, an extremely simple and quick operation, to be carried out for exampl…

Other guides you may be interested in

    Frequently Asked Questions

    • Audi Vari - What does the Audi green foot light mean? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos