Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 1, 8L
- Years 1996-2003 We can see through this short video tutorial the necessary steps to replace the batteries of a first-generation Audi A3 remote control, model produced from 1996 to 2003. To start, we insert a small flathead screwdriver into the slot located on the back of the remote control and begin to pry to separate the bottom part from the top part. Once this is done to reach the batteries, we take the bottom part of the remote control and open it with our hands, then remove the two old batteries and insert two new ones before finally closing the remote control. The required batteries are two CR1620 3V batteries.
Posted on 14 August 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.080
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |