Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Audi 2.0 TDi engine?

Model: Audi Audi Various
Part: Timing belt

In order to replace the timing belt of the Audi 2.0 TDi engine, you need to loosen the screws that hold the front bumper of the car, so that it can be removed to access the front part of the engine block. Here, you can loosen the screws that hold the protective panel underneath which the belt is positioned. The belt can be removed from its seat by loosening the central nut of the tensioner pulley and replacing it with a new spare part. After the replacement, all the previously removed components can be reinstalled to verify that everything is functioning properly.

Posted on 5 September 2023 by ScegliAuto

Video tutorial

Related tutorials

The problem caused by oil leakage in Audi A3 and Volkswagen Golf and Passat 1.6 and 2.0 TDI.
The problem caused by oil leakage in Audi A3 and Volkswagen Golf and Passat 1.6 and 2.0 TDI.
Audi Audi Various In this video we see the problem that can be caused by the loss of oil coming from the crankshaft oil seal on Audi A3 and Volkswagen Golf and Passat;…
Replacement of the timing chain of the Audi 2.5 TDI V6 AKE engine
Replacement of the timing chain of the Audi 2.5 TDI V6 AKE engine
Audi Audi Various In this video we can see how to replace the timing belt of the Audi 2.5 TDI V6 AKE engine, for which two toothed belts are needed; to lock the timing…
Fitting Pump Injectors for Volkswagen, Audi TDI
Fitting Pump Injectors for Volkswagen, Audi TDI
Audi Audi Various In this video, you will learn how to fit pump injectors in TDI engines from the Volkswagen group (Audi, Seat, Skoda, Volkswagen). These injectors oft…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos