Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper grille in the Audi TT?

Model: Audi Tt 8J, MK 2 - Years 2006-2014
Part: Grille

In this tutorial, we can see how to replace the front bumper grille on the Audi TT, a very simple and quick operation. First of all, we open the hood, and then we unhook the two plastic panels on the side of the grille by levering them from the top edge. Next, we unscrew all the indicated bolts using a Torx screwdriver, then we continue by unscrewing the screws accessible from the wheel arches and detach the corners of the bumper from the frame. At this point, we can remove the fog light bulbs, completely remove the bumper, and separate the grille from it. To install the replacement, simply follow the reverse procedure.

Posted on 1 October 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

Disassembly of the front bumper grille of the Audi TT.
Disassembly of the front bumper grille of the Audi TT.
Audi Tt (2006-2014 / 8J, MK 2) Today's brief instructions will show us how to disassemble and replace the front bumper grille of the Audi TT, following these simple steps. First, w…
Removing Front Bumper Grille
Removing Front Bumper Grille
Audi Tt (1998-2006 / MK 1, 8N) To remove the grille that houses the manufacturer's emblem, you need to take off the front bumper since the mounting tabs are located at the back. Fi…
Removing the rear bumper Audi TT
Removing the rear bumper Audi TT
Audi Tt (1998-2006 / MK 1, 8N) Let's see how the rear bumper of the Audi TT is removed. We lift the tailgate and see all the tightening screws around the bumper plastics. We unscre…

Other guides you may be interested in

How to Replace the Interior Light Bulbs on a Jeep Renegade

Let’s see how to replace the damaged bulbs in the interior light of a Jeep Renegade. Use a screwdriver to pry between the interior light and the headlining panel (without breaking the panel), pull the interior light out from the panel and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage). Refit the interior light into its housing (push the clear plastic with your hands until the clips are fully engaged in the side plastic). Test the correct operation of the bulbs in the interior light after installation.

Watch the video!


by ScegliAuto

More videos