Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B6
- Years 2000-2004 Open the engine compartment hood. Remove the headlights by unscrewing the two upper screws and the other two lower ones inside the engine compartment using the special tool. Now pull the headlight towards you by removing it from its housing. Disconnect the power cords by pushing the clip with your fingers and pulling the plug. At this point we can remove the bumper and, to do so, we need to unscrew the six bolts, inside the engine compartment, which secure the bumper at its ends. Also unscrew the two bolts that secure it at the bottom. Then we can remove, after disconnecting the power cables, the bumper from its housing. The car on which the maintenance operation seen in the images was carried out is an Audi A4.
Posted on 8 September 2023 by ScegliAuto
Other guides that may interest you
|
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |