Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Anti-Roll Bar Bushings

Model: Audi A6 MK 1, C4 - Years 1994-1997
Part: Bushings

The failure of the anti-roll bar bushings is a common issue on various car models, as they endure significant stress that can lead to breakage, resulting in contact between the bar and its support, causing noise. Replacing these bushings is quite simple: lift the vehicle, locate the support brackets of the stabilizer bar that house the bushings, unscrew the corresponding mounting pins to remove them, extract the old bushings, and insert the new ones while repositioning the brackets.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front stabilizer bar links of an Audi A6.
How to replace the front stabilizer bar links of an Audi A6.
Audi A6 (2004-2012 / MK 3, C6) Today with the help of this video tutorial, we will explain how to replace the front stabilizer bar links of an Audi A6, model C6. Let's start by sec…
How to reset the TPMS on the Audi A6 MMI
Audi A6 (2011-2018 / C7, MK 4) In this video we can see how to reset the TPMS of the MMI on the Audi A6 version C7, but it works on most high-end Audis. The tires are set correctly…
How to replace the third stop of the Audi A6 avant
How to replace the third stop of the Audi A6 avant
Audi A6 (2004-2012 / MK 3, C6) On the upper edge of the rear bonnet of this Audi model there is the third LED stop: to be able to replace it and therefore disassemble it, the plast…

Other guides you may be interested in

How to Replace the Gear Gaiter on the Opel Meriva

Want to replace the gear gaiter on the Opel Meriva? Let’s see how to do it in this video: detach the gaiter frame from the plastic covering on the centre console (cut the plastic tie with side cutters). Once the gaiter to be replaced is removed, install the new piece. Reassemble: attach the gaiter to the plastic frame, then insert the cover onto the gear stick (secure the tie as shown in the video). Lower the gaiter until it clicks into place in the plastics of the centre console. Test the correct fitting of the previously installed parts.

Watch the video!


by ScegliAuto

More videos