Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stabiliser Bar on a Renault Clio III

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Anti-roll bar

See other generations:
Video tutorial

Here’s how to replace the stabiliser bar on a Renault Clio III: you can find the kit for both links on Amazon with the code B07TX3DKZ9 for £19.01 plus £1 delivery. Lift the car and remove the affected wheel: the stabiliser bar is located between the shock absorber strut and the central stabiliser bar. To unscrew the fastening nuts, use a spanner on the outer nut and insert an Allen key into the central pin to unlock it while unscrewing.

Remove the old bar and position the new one in the holes. Insert the new nuts, tighten to 40/50 Nm, and refit the wheel.

It is advisable to replace stabiliser bars in pairs to maintain the balance of the suspension.


Posted on 20 February 2026 by ScegliAuto


Related tutorials

How to Change the Stabiliser Link on a Renault Clio IV
How to Change the Stabiliser Link on a Renault Clio IV
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To change the stabiliser link on a Renault Clio IV (costing £19.90 on auto-doc plus shipping), lift the front of the vehicle. Use a jack stand; do no…
How to Replace the Stabiliser Bar Link on a Renault Clio II
How to Replace the Stabiliser Bar Link on a Renault Clio II
Renault Clio (1998-2005 / MK 2, Clio 2) Let's see how to replace the stabiliser bar link on a Renault Clio II: loosen the nuts on the front wheels and then lift the car, supporting it on se…
Replacement of Anti-Roll Bar Bush
Replacement of Anti-Roll Bar Bush
Renault Clio (1998-2005 / MK 2, Clio 2) If you hear noise coming from the front end and handling seems to have worsened, it is likely that a support bush of the suspension arm has failed. B…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos