Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front handle in the Audi Q3?

Model: Audi Q3 F3 - Years 2018-2025
Part: Handle

In this tutorial, we can see how to disassemble the front handle in the Audi Q3, an extremely simple and fast operation. To do this, we will only need a screwdriver with a Torx T15 tip. First of all, we open the door in which we will be working, then we remove the rubber cap located on the inner edge of the door, at the height of the handle. Next, we loosen the bolt accessible from the hole, unscrew the outer bolt completely, and remove the lock cylinder. At this point, we separate the handle from the door and install the replacement if necessary.

Posted on 14 December 2023 by ScegliAuto

Video tutorial

Related tutorials

Replace the Exterior Handle on Audi Q3
Replace the Exterior Handle on Audi Q3
Audi Q3 (2011-2018 / 8U) Want to replace the right passenger side exterior handle on your Audi Q3? In this detailed video, we'll briefly show you how to disassemble and remov…
How do you replace the outside door handle on Audi Q3?
How do you replace the outside door handle on Audi Q3?
Audi Q3 (2011-2018 / 8U) To be able to replace the external handle of the Audi Q3 you have to go open the door and detach the circular rubber located on the side of the door.…
How to remove the front bumper of the Audi Q3.
How to remove the front bumper of the Audi Q3.
Audi Q3 (2011-2018 / 8U) In this guide, we will see the instructions that will allow us to disassemble and remove the front bumper of the Audi Q3. First, let's open the hood …

Removing the Front Arm Bushing of a Hyundai Getz

Let's look at removing the front arm bushing of a Hyundai Getz. First, place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. Use a socket spanner to unscrew the lower securing bolt of the arm and the bolt mounted under the wheel hub, then unscrew the bolts on the upper part of the arm (as shown in the video). Remove the bushing from the bolt housing. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them. Start the installation of the new part: fit the new bushing and tighten all bolts to the specified torque. Double-check the correct tightening of the parts. Refit the wheel to complete the job.

Watch the video!


by ScegliAuto

More videos