Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Handle on the Audi Q3?

Model: Audi Q3 8U - Years 2011-2018
Part: Handle

To replace the exterior handle on the Audi Q3, open the door and detach the circular rubber grommet located on the side of the door. Once this grommet is removed, loosen the Torx screw with a T20 screwdriver until it is completely free. This will allow you to pull the lock cylinder out from the outside. Once this is removed, you can unclip the handle and replace it with a new one. Then, reinsert the lock cylinder and secure it with the side screw.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Handle on an Audi Q3?
How to Remove the Front Handle on an Audi Q3?
Audi Q3 (2018-2025 / F3) In this tutorial, you will see how to remove the front handle on an Audi Q3, a very simple and quick operation. First, open the door you will be work…
How to remove the exterior rearview mirror of the Audi Q3.
How to remove the exterior rearview mirror of the Audi Q3.
Audi Q3 (2011-2018 / 8U) In this new mini guide aimed at those of you who own a first-generation Audi Q3, we will explain step by step how you can remove the exterior rearvie…
Replace the Exterior Handle on Audi Q3
Replace the Exterior Handle on Audi Q3
Audi Q3 (2011-2018 / 8U) Want to replace the right passenger side exterior handle on your Audi Q3? In this detailed video, we'll briefly show you how to disassemble and remov…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos