Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 2, 8P
- Years 2003-2013 In order to replace the timing belt of the Audi A3, you need to open the hood so that you can access the components located inside the engine compartment: on the left side, under the appropriate panel, you will find the belt around the pulleys. By removing the right front wheel and the corresponding wheel arch, you can loosen the central nut of the tensioner pulley and reduce the tension of the belt: it can now be removed and replaced with a new spare part, mounting all the components that were just removed.
Posted on 7 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |