Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why have the wipers on the Audi A3 stopped working?

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

If the wipers on your Audi A3 have suddenly stopped working, first check the condition of the relevant fuse, the location of which is indicated in this video. As shown, the fuse is located in the box within the engine compartment, protected by the black plastic cover next to the battery.

It is a 30A fuse and is the second from the bottom right column when facing the box. If faulty, ensure you use a replacement with equivalent specifications and operate with the vehicle turned off to avoid any damage.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

Replacing Wiper Blades on Audi A3
Replacing Wiper Blades on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) In this very simple video tutorial, you will learn how to replace the worn wiper blades on the Audi A3. First, lift the wiper blade off the glass: to…
How do you replace the rear wiper of the Audi A3?
How do you replace the rear wiper of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In order to replace the rear wiper of the Audi A3, you need to pry to completely disconnect the fastening clips that lock the wiper blade to its arm:…
How to replace the windshield wipers of the Audi A3
How to replace the windshield wipers of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) In this article, we will see how to replace the windshield wipers of the Audi A3 8P. First, you need to start the instrument panel, then activate the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos