Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B8
- Years 2007-2016 To replace the headlight bulb (H7 socket) it is necessary to remove the headlight itself as there is not enough room for maneuver in the engine compartment; however, the disassembly of the headlight is very simple to perform and it is not necessary to disassemble other elements such as the bumper; it is therefore only necessary to unscrew the four fixing screws of the headlight, two on the upper part and the other two in correspondence with the two lower edges; once the screws have been removed, remove the headlight from its seat, disconnect the relative power socket, remove the protective cap to access the bulb seat, disconnect the socket and unhook the bulb fixing spring to be able to replace it with the new one by proceeding backwards.
Posted on 21 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |