Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Audi Q5?

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Battery

In this tutorial, we can see how to replace the battery in the Audi Q5, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the trunk, lift the bottom panel, and remove the spare wheel. Next, locate the bolts of the battery securing strap, unscrew them using a 10mm XZN key, and starting from the negative terminal, disconnect both terminals. At this point, we can remove the battery from the housing, insert the replacement, and follow the reverse procedure.

Posted on 13 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the Audi Q5 key battery
How to change the Audi Q5 key battery
Audi Q5 (2017-2025 / 80A, MK 2) Let's see how to remove the battery in the remote control key on Audi Q5. We take the Audi car key and press the button to pop out the metal key. Onc…
How to replace the battery of the Audi Q5 remote control.
How to replace the battery of the Audi Q5 remote control.
Audi Q5 (2008-2017 / MK 1, 8R) The following video tutorial shows us the steps to replace the battery of the remote control of the Audi Q5 car. To replace the key battery, we need …
How to replace the remote control battery of the Audi Q5?
How to replace the remote control battery of the Audi Q5?
Audi Q5 (2017-2025 / 80A, MK 2) Replacing the low battery of the remote control of the Audi Q5 is a very simple operation, let's see how to proceed in this tutorial. To do this we d…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos