Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external rearview mirror in the Audi A5?

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Side mirror

In this tutorial, we can see how to disassemble the external rearview mirror in the Audi A6, an extremely simple and fast operation. First, we open the door in which we will work, then we remove the window regulator console and disassemble the panel. We then remove the internal cover of the mirror, disconnect the connector of the adjustment motor, and unscrew the single fixing bolt with a 10mm XZN key. At this point, we can separate the mirror from the door, place the replacement if necessary, and reassemble everything following the reverse procedure.

Posted on 28 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror of the Audi A6
How to replace the external rearview mirror of the Audi A6
Audi A6 (2018-2026 / C8, MK 5) Today we will see the step-by-step instructions that will allow us to disassemble and replace the external rearview mirror of the Audi A6. First, we …
How to Replace the Outside Rearview Mirror on the Audi A6?
How to Replace the Outside Rearview Mirror on the Audi A6?
Audi A6 (1997-2004 / MK 2, C5) To replace the outside rearview mirror on the Audi A6, detach the door panel to access the mirror mounting screws. To remove the panel, pull out the …
How do you remove the rearview mirror of the Audi A6 c7?
How do you remove the rearview mirror of the Audi A6 c7?
Audi A6 (2011-2018 / C7, MK 4) The external and electric rearview mirror, observable in the video presentation available here, gives us an idea about the car mentioned. The disasse…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos