Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator on the 2016 Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Service warning light

If you own a 2016 Audi Q3 and want to learn how to manually reset the service light, all you have to do is read the following guide and then follow the steps described. First, go to the driver's seat and start both the instrument panel and the central infotainment system. Then press the menu button and select the "Vehicle" icon. Next, click on "Servicing & Checks" and then on "Service Intervals". Once the new menu screen appears, proceed with resetting the light and a few moments later you are done.

Posted on 3 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on an Audi Q3
How to reset the service indicator on an Audi Q3
Audi Q3 (2011-2018 / 8U) In this video, we see how to reset the service light on a 2017 Audi Q3: turn on the ignition, press the "menu" button located on the left side of the…
How to Reset the Service Light on a 2020 Audi Q3
How to Reset the Service Light on a 2020 Audi Q3
Audi Q3 (2018-2025 / F3) In this new mini guide, you will discover how to correctly perform the manual reset of the service light on the instrument cluster of your 2020 Audi …
How to Reset the Service Light on a 2016 Audi Q3
Audi Q3 (2011-2018 / 8U) In this mini guide, you will learn how to correctly perform the manual reset of the service light on a 2016 Audi Q3. Once inside the vehicle, turn on…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos