Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock of an Audi A4

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Handle

See other generations:
Video tutorial

Open the door in question and remove the cover at the height corresponding to the handle to be repaired. This will give you access to the screw that needs to be loosened slightly without removing it. Loosening it will free the lock cylinder.

To also remove the handle, you will need to press the two tabs indicated in the video to unlock it and simply pull it out from the inside. Now that you have removed both parts of the handle, make the necessary repairs and retrace the steps in reverse for reassembling the various components, and you're done!


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Replace the Door Lock on an Audi A4?
How to Replace the Door Lock on an Audi A4?
Audi A4 (2000-2004 / B6) To replace the door lock on an Audi A4, completely remove the door panel after unscrewing the mounting screws. Once these are removed, you can access…
How to Replace the Door Lock on an Audi A4
How to Replace the Door Lock on an Audi A4
Audi A4 (2007-2016 / B8) To replace the door lock on an Audi A4, use a tool to pry off the trim pieces at the top and middle of the door panel. Once these trim pieces are rem…
How to Remove the Electric Lock of the Fuel Door on Audi A4 - A5
How to Remove the Electric Lock of the Fuel Door on Audi A4 - A5
Audi A4 (2007-2016 / B8) In this guide, follow the instructions to remove and replace the lock of the fuel door on the Audi A4 and A5. First, open the fuel door and gently re…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos