Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the Head-up Display in an Audi?

Model: Audi Audi Various
Part: Checks and maintenance

In this tutorial we can see how to activate and deactivate the Head-up Display in an Audi, which is the function of projecting driving information directly onto the windshield. First of all, let's go inside the cockpit, then insert the key and start the engine. Then we reach the general menu on the touchscreen display, enter "Settings", "Display & brightness", "Head-up display", and activate the function that suits us by choosing between "Basic" and "Augmented reality". In the same screen, we can adjust the various display properties such as height and brightness. To deactivate it, simply select "Off".

Posted on 1 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the plug from the back of an Audi headlight
How to remove the plug from the back of an Audi headlight
Audi Audi Various In this video we can see how to remove the rear connector from the front headlight of an Audi car. This connector has a safety lock that, if we do no…
How to remove the steering wheel airbag of an Audi
How to remove the steering wheel airbag of an Audi
Audi Audi Various Today we will explain how to remove the steering wheel airbag from an Audi car model. To perform this operation independently, we must get into the v…
How do adaptive headlights work on Audi vehicles?
How do adaptive headlights work on Audi vehicles?
Audi Audi Various The adaptive headlights on new Audis provide maximum visibility and illumination in any external lighting condition: when the adaptive headlights are…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos