Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of the Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

This guide will show you how to dismantle the front headlamp of the Audi A3. First, open the bonnet and begin by removing the front bumper, unscrewing all the fixing screws found above and below it; unscrew the additional screws located on both sides of the front wheel arches, detaching the bumper from the sides until it is completely removed, as shown in the video.

At this point, unscrew the screws of the headlamp unit and disconnect the electrical connector to remove it and replace it with the new one, or just replace the bulbs.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How do you remove the front headlight of the Audi A3?
How do you remove the front headlight of the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) In order to remove the front headlight of the Audi A3, you need to first remove the corresponding front bumper: to do this, you will need to loosen t…
How to disassemble the front headlight of the Audi A3
How to disassemble the front headlight of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this short guide, we will see the instructions that will allow us to disassemble and replace the front headlight of the Audi A3. First, we open th…
How to Remove the Front Bumper of the Audi A3 8P?
How to Remove the Front Bumper of the Audi A3 8P?
Audi A3 (2003-2013 / 8P, MK 2) Removing the front bumper on the Audi A3 8P requires the removal of several screws, but it is a straightforward task. For convenience, lift the car w…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos