Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Removing the Cabin Fan of the Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

See other generations:
Video tutorial

Today's instructions will show you how to remove and replace the cabin fan of the Audi A3, following these simple steps. First, get into the vehicle and start by removing the glove compartment and the plastic cover; you will find the cabin fan at the back, where you will disconnect its electrical connector and unscrew the securing screws to remove it, as shown in the video.

Now, replace and install the new original cabin fan, checking its operation; then reassemble the glove compartment!


Updated on 8 October 2026 by ScegliAuto


Related tutorials

Audi A3 (2003-2013 / 8P, MK 2) Today, we will go through the instructions needed to remove and replace the cabin fan on an Audi A3 in simple steps. First, get inside the vehicle an…
Audi A3 (2003-2013 / 8P, MK 2) Need to remove the air fan from an Audi A3? Remove the air fan from inside the dashboard. Open the front glove compartment, unscrew the securing scre…
Audi A3 (2003-2013 / 8P, MK 2) How to remove the ventilation fan on Audi A3. Use a plastic lever to remove the fabric cover under the glove compartment (unscrew the screws). Unscre…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos