Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cabin Fan on an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

Today, we will go through the instructions needed to remove and replace the cabin fan on an Audi A3 in simple steps. First, get inside the vehicle and start by removing the glove compartment by unscrewing all the fixing screws; then you will find the cabin fan at the back, which you will remove by unscrewing the fixing screws and disconnecting the electrical connector, as shown in the video.

At this point, remove and replace the cabin fan with the new one, as well as the original; apply the reverse procedure for reassembly!


Updated on 21 August 2026 by ScegliAuto


Related tutorials

Guide to Removing the Cabin Fan of the Audi A3
Guide to Removing the Cabin Fan of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today's instructions will show you how to remove and replace the cabin fan of the Audi A3, following these simple steps. First, get into the vehicle …
Guide to Replacing the Cabin Heater Radiator of the Audi A3
Guide to Replacing the Cabin Heater Radiator of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) These brief instructions will show you the main steps on how to dismantle and replace the cabin heater radiator of the A3, but also of the A1. First,…
How to Remove the Cabin Fan on an Audi A3
How to Remove the Cabin Fan on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Need to remove the air fan from an Audi A3? Remove the air fan from inside the dashboard. Open the front glove compartment, unscrew the securing scre…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos