Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Front Headlight on an Audi A3

Model: Audi A3 Sportback MK 2 - Years 2003-2013
Part: Headlight

Don’t know how to remove the front headlight on an Audi A3? Let’s see how to proceed in this detailed video. First, pull the plastic lever located at the bottom left of the dashboard, then lift the bonnet and secure it. Get a socket wrench, remove the upper part of the bumper cover, then unscrew the screws around the stone guard and those located at the bottom of the bumper. Carefully detach the central grille with your hands, remove the headlight after unscrewing the headlight support pins. Disconnect the connectors and replace any worn bulbs. To reassemble, proceed in reverse order. Finally, test the correct operation of the lights.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fit Roof Bars on an Audi A3
Fit Roof Bars on an Audi A3
Audi A3 Sportback (2003-2013 / MK 2) Fit roof bars on an Audi A3? Here’s how to install them. Fit the bar kit on cars without roof rails. Measure the bars according to the width of the c…
How do you disassemble the headlight of the Audi A3 Sportback?
How do you disassemble the headlight of the Audi A3 Sportback?
Audi A3 Sportback (2003-2013 / MK 2) The disassembly of the headlight of a vehicle, in this case the Audi A3 Sportback, occurs for several reasons: cleaning of the opaque glass, replacem…
How to replace the interior rear light of the Audi A3 Sportback
How to replace the interior rear light of the Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) To replace the internal taillight of the Audi A3 Sportback, we start by opening the trunk, with a plastic tool we remove the inner cover (on the trun…

Other guides you may be interested in

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos