Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Solution to the problem of the fuel tank door of an Audi A6 C7 that does not open

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Fuel cap

What solution can we find at the fuel door of an Audi A6 version C7 that does not open? We can see it in this video: obviously if the car is locked the fuel door does not open, but unfortunately it also does not open even when unlocking the central locking system; emergency unlocking from the cabin also does not work. The solution is: with the car unlocked, you have to wait exactly one minute, after which you press the remote control again near the fuel door. You will hear a series of clicks inside the door, which will unlock and allow access to the refueling nozzle.

Posted on 20 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel door actuator in the Audi A6?
How to replace the fuel door actuator in the Audi A6?
Audi A6 (2011-2018 / C7, MK 4) In this tutorial, we can see how to replace the fuel door actuator in the Audi A6, a very simple and quick operation. First of all, make sure that th…
How to fill up with AdBlue in the Audi A6
How to fill up with AdBlue in the Audi A6
Audi A6 (2011-2018 / C7, MK 4) If when starting your Audi A6 Diesel you notice the appearance of a warning regarding AdBlue then it means that you must necessarily fill the relativ…
How to refuel an Audi A6?
How to refuel an Audi A6?
Audi A6 (2018-2026 / C8, MK 5) Good morning, today's goal is to understand how to open the fuel door of our Audi A6 and refuel. Let's start by driving the car to a gas station. The…

How to Remove the Spark Plugs from a Volkswagen Up

How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head. Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors. To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves.

Watch the video!


by ScegliAuto

More videos