Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find and How to Access the Fuse Box of an Audi A7?

Model: Audi A7 MK 2 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Fuse box

See other generations:
Video tutorial

The fuse box of an Audi A7 is located in the trunk, specifically on the right side. To access it, open the trunk lid and locate the access panel situated on the right side of the compartment.

It is usually covered by a small cover or door that can be easily removed. Once you remove the access panel, you will find the fuse box. This box contains the fuses responsible for the operation of various electrical components of the vehicle.

Each fuse is labeled to indicate the component it protects, making it easier to identify and replace the correct fuse in case of failure. To open the fuse box, you may need to disengage some clips or remove additional covers.

Make sure to have the owner's manual handy for specific details and a visual guide to assist you in the process. Once the box is open, replace the blown fuse with a new one of the same amperage.

Then close all covers and the access panel once the replacement is complete.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Fuse Box Diagram for an Audi A7
Fuse Box Diagram for an Audi A7
Audi A7 (2010-2017 / MK 1) In this very useful video guide, find the location of the fuse boxes in our first-generation Audi A7, produced from 2012 to 2018. The first two fuse …
Where are the fuses located in the Audi A7?
Where are the fuses located in the Audi A7?
Audi A7 (2018-2025 / MK 2) The fuse boxes of the Audi A7 are responsible for containing the fuses that regulate the operation of the devices. In this type of car there are thre…
Fuse Box Diagram for an Audi A7
Fuse Box Diagram for an Audi A7
Audi A7 (2010-2017 / MK 1) In this very useful video guide today, see all the diagrams for the three fuse boxes located inside a first-generation Audi A7. These diagrams accura…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos