Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Audi A3 8P

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Front bumper

In this video we can see how to remove the front bumper of the Audi A3 8P: we will need a T30 and a T25 key and a Phillips screwdriver. We will start by removing the four screws inside the wheel arch on each side. Once the wheel arch is removed, inside we will find another T25 screw and a 10 bolt, for which we will also need an extension. In the lower part of the bumper we will have four T25 on the left side, and moving towards the center we will have three Phillips screws, and then find the same on the other side. In the upper part, under the hood there are three T30. When removing the bumper, remember that the fog lights are attached, and we must disconnect the connectors with a flathead screwdriver. If we want to remove the honeycomb part, we must place the bumper on a large cardboard and remove all the screws and clips that hold it attached from the inside. In this case, the youtuber wanted to change the Manufacturer's emblem.

Posted on 5 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Bumper on the Audi A3
Replacing the Front Bumper on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) The video author instructs you on how to replace the front bumper on an Audi A3. First, remove the three screws from each front wheel arch. Next, ope…
How to Replace the Headlamp on the Audi A3
How to Replace the Headlamp on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the headlamp on the Audi A3? To remove the front headlamp of the A3, you need to take off the front bumper. Use a screwdriver to u…
How to Replace the Front Grille on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To replace the front grille on the Audi A3, you must first remove the front bumper. This can be done by loosening the screws located inside the wheel…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos