Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Rear bumper

If you want to disassemble the rear bumper of your Audi A4 B8 by yourself, just read carefully the following guide and follow the step-by-step procedure described. First of all, park the car on a flat surface and turn it off completely, then go outside and go near the rear hood. At this point, lift the hood and unscrew the two safety hooks located on both sides of the trunk. Immediately after, remove both rear lights of the car and use a battery-powered screwdriver to unscrew all the screws holding the bumper in place. Finally, complete the removal of the bumper.

Posted on 18 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper of the Audi A4
How to remove the rear bumper of the Audi A4
Audi A4 (2000-2004 / B6) Let's see in this guide the instructions on how to disassemble and replace the rear bumper of the Audi A4, in simple and quick steps. First of all, l…
How do you remove the rear bumper of the Audi A4?
How do you remove the rear bumper of the Audi A4?
Audi A4 (2007-2016 / B8) In order to replace the rear bumper of the Audi A4 you have to go to access the lower part of the bumper, so that you can loosen the three screws bel…
How to Remove the Rear Bumper on Audi A4
How to Remove the Rear Bumper on Audi A4
Audi A4 (2004-2008 / B7) How to remove the rear bumper on Audi A4? Follow these steps for a straightforward operation: open the trunk, grab a Phillips screwdriver and a socke…

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos