Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the Benelli Imperiale 400?

Model: Benelli Imperiale 400
Part: Brake pads

Video tutorial

It will be possible to replace the front brake pads of the Benelli Imperiale 400 by loosening the screws that secure the brake caliper to its housing on the disc: then you can completely detach the caliper from its seat in order to remove the pin that locks the pads and remove them from their seat.

The new pads can now be inserted into the caliper, then reposition it on the disc: it will now be necessary to secure it with the screws and verify that the front brake works correctly even after the replacement has taken place.


Posted on 19 November 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the Benelli Imperiale 400?
How to Replace the Rear Brake Pads on the Benelli Imperiale 400?
Imperiale 400 To replace the rear brake pads on the Benelli Imperiale 400, loosen the screws that secure the brake caliper to the corresponding disc: once these sc…
How to Replace the Rear Brake Pads on a Benelli Imperiale 400?
How to Replace the Rear Brake Pads on a Benelli Imperiale 400?
Imperiale 400 To replace the rear brake pads on a Benelli Imperiale 400, loosen the bolts that secure the brake caliper to the brake disc. Once the bolts are loose…
How to Replace the Rear Brake Pads on the Benelli Imperiale 400?
How to Replace the Rear Brake Pads on the Benelli Imperiale 400?
Imperiale 400 In this tutorial, see how to replace the rear brake pads on the Benelli Imperiale 400, a very simple and quick operation. First, position yourself in…

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos