Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulb on Benelli Imperiale 400

Model: Benelli Imperiale 400
Part: Headlight bulb

Video tutorial

All you will need, besides the new bulb, is a cross screwdriver. With this, unscrew the screws that secure the front headlight and remove it from its housing, then disconnect the connector.

Now that you have the headlight free, place it on a workbench and unscrew the three small screws at the back of the light. Remove the rear cover and unscrew the second connector, then slightly rotate the rear clip of the bulb and pull it out. Insert the new bulb and proceed in reverse until fully reassembled.

As you can see, it is a simple operation.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Replacing Front Indicator Bulb on Benelli Imperiale 400
Replacing Front Indicator Bulb on Benelli Imperiale 400
Imperiale 400 Replacing the front indicator bulbs on a Benelli Imperiale is a very simple maintenance task, quick and truly accessible to everyone, even novice mec…
How to Replace the Headlight Bulb in the Benelli Imperiale 400?
How to Replace the Headlight Bulb in the Benelli Imperiale 400?
Imperiale 400 In this tutorial, you will see how to replace the headlight bulb in the Benelli Imperiale 400, an extremely simple and quick operation. First, ensure…
How to Replace the Rear Brake Pads on the Benelli Imperiale 400?
How to Replace the Rear Brake Pads on the Benelli Imperiale 400?
Imperiale 400 To replace the rear brake pads on the Benelli Imperiale 400, loosen the screws that secure the brake caliper to the corresponding disc: once these sc…

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos