Do it yourself
Frequently asked questions about cars and motorcycles
This guide shows how to perform routine maintenance by replacing the engine oil and oil filter on a Benelli TNT 125. First, place the motorcycle on its stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video. At this point, unscrew the filler screw and pour in the new engine oil, ensuring you add the correct quantity!

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Tnt 125 .. In this video, learn how to replace the engine oil and oil filter on a Benelli TNT 125, performing the regular maintenance.. …
Tnt 125 The information below will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Benelli TNT 125 mot…
Tnt 125 Discover the necessary steps to perform routine maintenance by changing the engine oil and oil filter on a Benelli TNT 125 motorcycle. First, place t…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos