Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2010 Bentley Continental GT

Model: Bentley Continental GT MK 1 - Years 2003-2011
Part: Service warning light

If you own a first-generation Bentley Continental GT (2010) and want to find out the steps to follow to complete the manual reset of the service light, then all you have to do is read the following guide and follow the procedure described. First, enter the cabin and start the ignition. At the same time, hold down the "Trip" button located to the left of the steering wheel and wait a few seconds. Finally, release the "Trip" button and make sure the service light is off. At this point, you can also start the engine or turn off the ignition.

Posted on 21 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service of the Bentley GT Continental
How to reset the service of the Bentley GT Continental
Bentley Continental GT (2003-2011 / MK 1) In this video, we see how to reset the service light on the Bentley GT Continental. To be honest, it wouldn't be necessary to explain how to do it, b…
How to Replace the Cabin Filter on a Bentley Continental GT?
How to Replace the Cabin Filter on a Bentley Continental GT?
Bentley Continental GT (2018-2024 / MK 3) To replace the cabin filter on a Bentley Continental GT, lift the bonnet to access its upper internal part: here you will find two cabin filters. You…
How to Reset the MMI Multimedia System in the Bentley Continental?
Bentley Continental GT (2018-2024 / MK 3) In the Bentley Continental, the MMI multimedia system may freeze or show various signs of malfunction. In these cases, you can try to resolve the iss…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos